모바일 메뉴 열기

충남대학교

충남대학교 건설재료시공학연구실

Building material & construction lab.

모바일 메뉴 닫기
 
처음으로
프린트 확대 축소

국내전문학술

김홍섭, 김규용, 이상규, 최경철, & 남정수. (2019). 비정질 강섬유의 길이 및 혼입률에 따른 섬유보강 시멘트복합체의 직접인장특성. 한국건축시공학회지 (JKIBC), 19(3), 201-207.
김홍섭, 김규용, 이상규, 최경철, & 남정수. (2019). 비정질 강섬유의 길이 및 혼입률에 따른 섬유보강 시멘트복합체의 직접인장특성. 한국건축시공학회지 (JKIBC), 19(3), 201-207.
작성자 관리자
조회수 109 등록일 2019.06.01
주저자 김홍섭
교신저자 042-821-7731
공동저자 김규용,이상규,최경철
학술지명 한국건축시공학회지 제 19권 3호
Abstract
In this study, the direct tensile properties of amorphous metallic fiber-reinforced cement based composites according to the strain was evaluated. A thin plate-shape amorphous metallic fiber with 15mm and 30mm in length was used. And fiber-reinforced cement based composites were prepared with contents of 1.0, 1.5, 2.0%. The direct tensile test was conducted under the conditions of 10-6/s(static) and 101/s(dynamic) strain rate. As a results, amorphous metallic fiber with a length of 15mm was observed in pull-out behavior from the cement matrix because of the short fiber length and large portion of mixed fiber. On the other hand, amorphous metallic fiber with a length of 30mm were not pulled out from matrix because the bonding force between the fiber and matrix was large due to rough surface and large specific surface area. However, fracture occurred because thin plate shape fibers were vulnerable to shear force. Tensile strength, strain capacity and toughness were improved due to the increase in the fiber length. The dynamic increase factor of L15 was larger that of L30 because the bonding performance of the fiber-matrix interface is significantly affected by the strain rate.