모바일 메뉴 열기

충남대학교

충남대학교 건설재료시공학연구실

Building material & construction lab.

모바일 메뉴 닫기
 
처음으로
프린트 확대 축소

국외전문학술

Kim, G., Kim, Y., & Lee, T. (2010). A Study on Thermal Efficiency of Heat Testing Machine for Heat Transfer of Concrete at High Temperature. Journal of Asian Architecture and Building Engineering, 9(2), 431-438.
Kim, G., Kim, Y., & Lee, T. (2010). A Study on Thermal Efficiency of Heat Testing Machine for Heat Transfer of Concrete at High Temperature. Journal of Asian Architecture and Building Engineering, 9(2), 431-438.
작성자 관리자
조회수 962 등록일 2010.11.01
주저자 김규용
교신저자 042-821-7731
공동저자 김영선, 이태규
학술지명 Journal of Asian Architecture and Building Engineering/November 2010/462

 

Abstract
The deformation of building frameworks can lead to critical disasters such as building collapse. Loads, thermal expansion and creep are generally known factors, which cause deformation. High temperature due to fire can also be one of the major factors since concrete deterioration can affect the performance of building structures and eventually can weaken the frameworks. It is, however, difficult to estimate the influence of fire on concrete structures and evaluate the performance of fire resistance design. Many researchers have carried out experiments using small-scale specimens to tackle this issue and it was shown that specimens can reflect the real behavior of structures reasonably well. Nonetheless, it is challenging to achieve uniform temperature rise throughout the specimens while heating the structure as concrete has low thermal conductivity. Many different heating methods were used in recent studies to overcome this problem; however, one cannot compare the results directly to other results due to the variation of the experiment conditions. In this study, therefore, a new heating and loading method was suggested which combines the existing heating systems. Several experiments were carried out to show that a new method can maintain uniform temperature while heating so that the experiment can produce more accurate data.